# 1
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This is a huge difference maker for us. I can open the tailgate of our truck with the trailer still attached, and helps minimize any body damage if my backing up is not good.
# 2
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
I like the extra long length. No one else make a hitch this long.
# 3
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 8" Drop, 9" Rise
It’s a great product and performed as I needed it. I need the two inch ball and the 2 1/4 in ball scraped the street as I was backing out. There should be a way to take the ball you don’t use off!
Nice looking and very well made. I will be hauling a 24’ enclosed trailer with combine weight of 6000 pounds. I am replacing a one piece steel unit that was showing signs of bending. This should be safer.
# 4
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 5
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
Purchased a vehicle with a class 2 factory hitch installed. This was the proper drop to haul my band trailer. First trip went without an issue.
# 6
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 7
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 8
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Works great used for 3 different trailer we have handy it's heavy well made.
# 9
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
The ball mount did not fit onto the shank. This was a very disappointing experience.
The fit of the U channel for the ball mount was too tight over the verticle drilled box tube. It needed “persuasion” to get it over the tube. This will make height changes away from the shop difficult. No rattle though.
# 10
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 11
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
# 12
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 13
Pintle Hook Combo 2" Ball with 2" Shank, 12K
The hitch I ordered came very quickly. I was able to track it and I pretty much knew when it would be at my door step. The hitch was more then I expected Heavy Duty. Awesome quality and more features then I realized. The fit was perfect. I will be using the hitch on a front mount receiver on my 2014 Silverado.
Excellent Quality... Best price and fastest delivery! Everyone with a towing package needs one of these in their vehicle...
# 14
Convert-A-Ball Ball Mount for 2" Hitches - 6-3/4" Rise, 8" Drop - 10,000 lbs
I use this hitch when I pull my horse trailer to make the stop/start transitions as smooth as possible for the horses in the back. It works great. I also love that its a category IV hitch. Really heavy duty. My truck sits pretty high, and the amount of drop - 8" is perfect. I never worry about hitch failure travelling with my horses - they're a heavy load, and any failure would be a disaster. E Trailer provided excellent service, and their shipping to Canada was prompt and hassle free. Way to go guys, keep up the great work!
I have a 2012 GMC Sierra HD with a 12" suspension lift. I recently purchased a ball mount hitch with 8" inch drop for our 36' RV trailer and it worked great. It took 3 days for the hitch to get to me. Great service from e-trailer.
# 15
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
My order was missing installation parts, but the etrailer team were quick to correct the issue. Even without a lift, I was able to install the receiver and brake light cable quickly, thanks to their extensive video libray.
2024 CRV. Pretty straightforward install. The fish wires in the kit are a fantastic solution to holding the bolts. Thanks!
# 16
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 17
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Works great. Needed the drop to tow a utility trailer at level.
As always etrailer has the best products, best information and customer service, plus fast shipping! Thank you again!
# 18
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
This slightly longer than average bar was perfect for my application. The drop length was perfect also for the application. As usual, eTrailer's site and retail experience was first rate. Lots of info and specs (and videos) available makes it easier to get that piece of mind knowing that what you needed was what you ordered.
# 19
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Gone are the days I need to carry three different hitches with different sized balls on them. Gone are the days when I, or others, walked around the back of my truck and cracked their shin on a protruding trailer hitch. I keep this folded up in front of the drop where it's not going to catch anyone by surprise. When I'm ready to use it, I simply pull two pins out which allows it to drop free and rotate out. I choose the height I need and install the two pins/clips. To rotate the balls, again simply pull the third pin and rotate to desired size. It was more than I wanted to spend at the time but since I'm glad I spent the money.
Very impressed with it. It is a really solid hitch Probably overkill for my F150 and 10' utility trailer, but rather have it and not need it, than to need it and not have it.
# 20
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
The hitch works great. The service was excellent!!! I'm going back and having a hitch put on my other car soon. Thank you.
Everything was perfect.! Nice paint, package, and fast shipping.! Im satisfied.!
MaxxTow Tow Strap Loop Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler, we'll be test fitting the Maxxtow tow strap loop for two inch hitches, rated at ten thousand pounds, part number MT70029. We'll begin our test fit by sliding the shank of the strap loop into the opening of the hitch, and securing it with a pin and clip. It could be used in agricultural, industrial, or recreational applications. The hitch pin and clip are sold separately. That will complete today's test fit for the Maxxtow tow strap loop for two inch hitches, part number MT70029, on our 2013 Jeep Wrangler. .
MaxxTow Adjustable-Height Ball Mount Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler we'll be test fitting the MaxxTow adjustable height ball mount for two inch hitches with a ten inch drop or eight inch rise rated at 5,000 pounds, part number MT70067. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about nineteen and three-quarters of an inch. Keep in mind that this measurement may vary due to tire size, hitch style or other after market accessories. We'll now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch and securing it with a pin and clip. We then can lower the ball mount platform into its lowest position by pulling the two clips and readjusting the pins. With the ball mount platform in it's lowest position with the ball mount in a drop position, we can measure from the ground to the top of the ball platform and we'll get a measurement of about ten inches. We can now put the ball mount platform in its highest position with the ball mount sill in the drop.
Draw-Tite Ball Mount Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler, we'll be test fitting the Draw-Tite ball mount with a3/4 inch rise or a 2 inch drop, rated at 7500 pounds, part number 2923. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the of the receiver tube. The hitch height for this vehicle is about 19 and 3/4's of an inch. Keep in mind that this measurement may vary due to tire size, hitch style, or other aftermarketaccessories. We'll now go ahead and begin our test fit by sliding the shank of the ball mount in the drop position in to the receiver tube of our hitch. We can then secure it with a pin and a clip. We can then measure from the ground to the top of the ball platform, getting a measurement of about 17 and 1/2 inches. Now if your vehicle's hitch height matches ours, and your trailer's ride height matches this measurement, this should be an appropriate ball mount for you. We can then flip the ball mount over to the rise position, and again, measure from the ground to the top of the ball platform.
Curt Tri-Ball Mount Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler, we'll be test fitting the Curt Tri Ball Mount for 2inch hitches, part number C45001. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 19 and 3/4's of an inch. Keep in mind that this measurement may vary due to tire size, hitch style, or other aftermarket accessories. We'll begin our test fit by sliding the shank of the ball mount in to the opening of the hitch, and securing it with a pin and clip. Now since this ball mount has no drop or rise, if your vehicle's hitch height matches your trailer's ride height, this ball mount would be appropriate for you. You can also flip the ball mount over to the left to access the 2 inch ball, or you can flip it over to the right to access the 1 and 7/8's inch ball. This ball mount is a great way for you to carry multiple size trailers without needing to purchase additional ball mounts. And that will complete today's test fit for the Curt Tri Ball Mount for 2 inch hitches, part number C45001 on our 2013 Jeep Wrangler.
Convert-A-Ball Pintle Mounting Bar Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler, we'll be test fitting a Convertible Cushioned Adjustable Pintle Mounting Bar for two inch hitches, weighted at ten thousand pounds, part number AMPC2. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about nineteen and three quarters of an inch. Keep in mind that this measurement may vary due to tire size, hitch style, or other after market accessories. We'll begin our test fit by sliding the shank of the mounting bar into the opening of the hitch in the drop position and securing it with a pin and clip. Now that the mounting bar is secure to the vehicle, we'll measure from the ground to the center of the second hole from the bottom. We'll geta measurement of about sixteen inches.
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler, well be test fitting the Convert-A-Ball Cushion 6-Way Multi Hitch Ball Mount for 2 inch hitches, rated at 10,000 pounds, part number CAB-6W. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with the pin and clip. Now since this ball mount has no drop or rise, if your vehicles hitch height matches your trailers ride height, this ball mount would be appropriate for you. Now with the ball mount on this position, you can access the 2-5/16 of an inch ball at the top. We can now rotate the ball mount to the left or to the right to access the either 1-7/8 inch ball or the 2 inch ball. Now if you flip it over toward the pin and at the top portion of the ball mount, you can see that once we remove this over clip, the pin cannot be removed from the ball mount. Therefore it can only be used at the bottom of the ball mount.
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler well be test fitting the Convert-a-ball dual cushion adjustable ball mount with a seven inch rise, two and nine inch drop rated at 5,000lbs part #: CAB-UM. Before we begin our test fit well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 19 and three quarters of an inch. Keep in mind that this measurement may vary due to tire size, hitch style or other after-market accessories. Well begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch and securing it with the pin and clip.
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler, we'll be test fitting the convertible cushion ball mount for two inch hitches with a 6 3/4 inch rise, 2 1/8 inch drop, rated at 10,000 pounds, part number AMSC8. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 19 3/4 of an inch. Keep in mind that this measurement may very due to tire size, hitch style, or other aftermarket accessories. We'll begin our test fit by by sliding the shank of the ball mount in the drop position into the opening of the hitch, and securing it with a pin and clip. We can then measure from the ground to the top of the ball platform getting a measurement of about 11 3/4 of an inch. Now if your vehicle's hitch height matches ours, and your trailers ride height matches this measurement, this should be an appropriate ball mount for you. We can now flip the ball mount over to the rise position, and as you can see, the ball mount does come in contact with the spare tire, and prevents us from securing the ball mount with the pin and clip.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler we'll be test fitting the Convert-a-Ball cushion ball mount for 2-inch hitches with a 3/4-inch rise or 2-inch drop, rated at 10,000 pounds, part number AMSC2. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 19-3/4 inch. Keep in mind that this measurement may vary due to tire size, hitch style or other after market accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch and securing it with a pin and clip. We can then measure from the ground to the top of the ball platform getting a measurement of about 18-1/4 inch. Now if your vehicle hitch height matches our's and your trailer ride height matches this measurement, this should be an appropriate ball mount for you. We can now flip the ball mount over into the rise position and again measure from the ground to the top of the ball platform. We'll get a measurement of about 20-1/2 inches.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Jeep Wrangler
Today on our 2013 Jeep Wrangler, well be test fitting the Convert-A-Ball Cushion Ball Mount for 2 inch hitches with a 1 inch rise or a 2 inch drop, rated at 14,000 pounds, part number AMSC2HD. Before we begin our test fit, well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 19-3/4 of an inch. Keep in mind that this measurement may vary due to tire size, hitch style or other aftermarket accessories. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch in the drop position and securing it with the pin and clip. We can then measure from the ground to the top of the ball platform getting a measurement of about 18 inches.
What our customers are saying:
"Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!"